Bartec MC 9090ex-G Manual de usuario descargar pdf (Pagina 45)

Mobile Computer MC 9090

Page 45

7. Snap on the keypad in the direction of the arrow (fig. 4) and push it upwards until the boreholes for the

screws are over the threaded sleeves.

Fig. 4: Changing the keypad

8. Check that the keypad is mounted correctly.

Figure 5: Keypad mounted correctly Figure 6: Keypad mounted incorrectly

9. Push the keypad in the direction of the arrow (fig. 4) until the boreholes on the keypad are positioned over

the threaded holes on the enclosure. Tighten the screws (torque = 0.565 Nm / torque = 5.0 in-lbs),

0.5 Nm advisable

Caution: The torque must be adhered to.

10. After the exchange of the keyboard a cold boot (see chapter 5.5 "Warm Boot and Cold Boot ") must be

performed.

The current drivers of the new keyboard are initialized by the cold boot.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Sin comentarios

Bartec MC 9090ex-G Manual de usuario Pagina 45