Bartec MC 9090ex-G Manual de usuario descargar pdf (Pagina 36)

User Manual Mobile Computer MC 9090

Page 36

5.3 Battery

5.3.1 Battery Information

BARTEC rechargeable battery packs (type 17-A1Z0-0002) are designed and constructed to the highest standards within

the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement.

Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and falls from

heights. When batteries are stored over 6 months, some irreversible deterioration in overall battery quality may occur.

Store batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic

parts and electrolyte leakage. When storing batteries for ½ year or longer, they should be charged and discharged at least

once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of the battery.

Replace the battery when a significant loss of run time is detected. Batteries must be charged within the 0° to +40 °C

(32° to 104° F) temperature range.

Standard warranty period for all BARTEC batteries is 1 year, regardless of whether the battery was purchased separately

or included as part of the Mobile Computer.

5.3.2 Charging Processes

Charging the Battery Separately

Remove the battery, type 17-A1Z0-0002

1. Prior to removing the battery, press the red Power button. This sets the Mobile Computer to suspend mode.

2. Press the primary battery release(s). ( 1 in figure ) The battery partially ejects from the Mobile Computer.

3. Pause 3 to 4 seconds while the Mobile Computer performs battery removal shutdown.

4. Press the secondary battery release ( 2 in figure ), on top of the battery, and slide the battery out of the

Mobile Computer. ( 3 in figure )

Insert the battery into the cradle or charging station. The battery is normally completely recharged in less than 8 hours. The

battery has finished charging if the yellow LED is on and steady. (Follow instructions in chapter 4.3.4 "Charging the

Battery").

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Sin comentarios

Bartec MC 9090ex-G Manual de usuario Pagina 36