Bartec MC 9090ex-S Manual de usuario descargar pdf (Pagina 49)

Additional Information

The requisite preconditions for the safe operation of electrical equipment in potentially explosive atmospheres are created

in a joint effort by the manufacturers of explosion protected equipment and the constructors and operators of industrial

plants. It is important that the operator of such plants should ensure that their personnel know how the danger of explosions

is likely to arise and the measures that are to be taken to prevent it.

The employees should be regularly trained on the contents of the explosion protection document in accordance with the

Directive 1999/92/EC - in the Federal Republic of Germany implemented on the basis of the "BetrSichV Betriebssicher-

heitsverordnung" (occupational safety regulations) - and informed by means of written corporate regulations which should

be regularly updated. BARTEC as a specialist for safety technology offers such consultation and training.

Design Regulations for Explosion Protected Systems, Devices and

Components - Equipment

Hazards arising from the handling of flammable gases, vapours and dusts are caused by uniform chemical and physical

processes. For this reason, the protection against these hazards must be carried out in a uniform manner.

Nearly universal uniform requirements have now been formulated by the International Electrotechnical Commission IEC, by

the European Standardisation Committees CENELEC and CEN and by DKE and DIN.

Manufacturers and operators are required to adhere to these, and where there are increased protection requirements, they

are monitored by accredited test laboratories and the authorities.

You can download further fundamental information to the explosion protection on our homepage:

Basic concepts for explosion protection:

http://www.bartec.de/homepage/deu/40_service/60_fachartikel/s_40_60_20.shtml

8.2 Information around the Explosion Protection

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Sin comentarios

Bartec MC 9090ex-S Manual de usuario Pagina 49